trouble running Design/Blend
Hi all,
I downloaded and installed Expression Studio through Dreamspark. I can't seem to get Blend and Design to work. Web and Media work fine, but when I open either Blend or Design, I get, "Microsoft Expression Blend (or Design) has encountered a problem and needs to close. We are sorry for the inconvenience."
The report for Blend contains,EventType : clr20r3 P1 : blend.exe P2 : 1.0.1083.0 P3 : 4613c995
P4 : microsoft.expression.framework P5 : 1.0.2.1000 P6 : 4613c973
P7 : b58 P8 : 0 P9 : system.typeinitialization
If I choose debug, the error shown is, "An unhandled exception ("System.TypeInitializationException') occured in Blend.exe" [3264]Running XP sp2, tried repairing install, also installed Visual Studio 2008 and have .net framework 3.5 installed, and have tried uninstalling and reinstalling. Again, Web and Media work fine, as well as VS2008.
Any ideas?
Respostas
- I wanted to give one more update on this issue. The environment variable wasn't the cause of BrokenSequencer's crash. After doing a remote debug we were able to figure out that it was, in fact, a corrupted font causing the problem. Someone else had pointed that out earlier. In this case there was a font called Tahoma.ttf with a size of 0 KB in the Windows fonts folder. Design does load the fonts on launch through the environment variables, which is how I found the other issue. The environment variable was good in this case and pointed to a good location.
What to look for if you suspect a bad font: Any font in the fonts folder that doesn't report a size or has a size of 0 KB, doesn't show a name or a font type. If you receive an error deleting the font you can run SFC /SCANNOW from a command prompt to do a repair of system files. You may be promtped for the operating system CD when you run this. Another option is to run CHKDSK /F from a command prompt to have windows repair bad sectors/clusters on the hard drive.
Todas as Respostas
- I'll ask our support engineer to take a look at this. I've seen this problem reported before. Can you tell me which Operating System you've installed the Suite to?
Annie - Running XP sp2
thanks for any assistance you can offer - Our support engineer is looking into the problem and has suggested the following:
1. First, make sure you have the .NET Framework 3 installed. Go to Add/Remove Programs and look to make sure you have the .NET Framework 3. Even if you have the .NET Framework 3.5, Design can't use that version. You can install the .NET Framework 3 without disturbing .NET Framework 3.5.
2. Turn off Hardware acceleration in your display settings.
3. If the foregoing doesn't work, boot into Safe mode and see if you can run Design and/or Blend.
4. If none of these work, look in the Even Viewer and post the results of the crash in the two most recent entries so the support engineer can have more information to isolate the problem.
Thank you for your patience. I'm sure this must be frustrating for you.
Annie - Annie,
Thanks for the info. Will try this evening and post back. As far as .net 3, I'm fairly certain expression studio installed v3. I then read somewhere online that someone was having the same issue and installed Visual Studio 2008 and then Design/Blend began working, so I tried that and that's how I got to .net 3.5, but I will try your suggestions and post back. Thanks again for all of your help. - Annie,
Made sure .NET framework 3.0 is installed (along with 2.0 and 3.5) Turned off hardware acceleration, tried safe mode...none of it worked...I rebooted each time a change was made as well...also made sure graphics card (ATI Radeon 9600 xt 128Mb) was updated with latest driver. Still receving same error, only now, Blend never even comes to the error screen. Design waits at the little splash bar for about 10 seconds, then goes to the error reporting option, but now Blend just sits and never does anything.
The event viewer shows the folling error for Design:
in bytes
0000: 63 00 6c 00 72 00 32 00 c.l.r.2.
0008: 30 00 72 00 33 00 2c 00 0.r.3.,.
0010: 20 00 64 00 65 00 73 00 .d.e.s.
0018: 69 00 67 00 6e 00 2e 00 i.g.n...
0020: 65 00 78 00 65 00 2c 00 e.x.e.,.
0028: 20 00 34 00 2e 00 30 00 .4...0.
0030: 2e 00 32 00 37 00 31 00 ..2.7.1.
0038: 32 00 2e 00 30 00 2c 00 2...0.,.
0040: 20 00 34 00 36 00 32 00 .4.6.2.
0048: 64 00 62 00 36 00 66 00 d.b.6.f.
0050: 64 00 2c 00 20 00 70 00 d.,. .p.
0058: 72 00 65 00 73 00 65 00 r.e.s.e.
0060: 6e 00 74 00 61 00 74 00 n.t.a.t.
0068: 69 00 6f 00 6e 00 63 00 i.o.n.c.
0070: 6f 00 72 00 65 00 2c 00 o.r.e.,.
0078: 20 00 33 00 2e 00 30 00 .3...0.
0080: 2e 00 30 00 2e 00 30 00 ..0...0.
0088: 2c 00 20 00 34 00 37 00 ,. .4.7.
0090: 30 00 62 00 63 00 39 00 0.b.c.9.
0098: 36 00 61 00 2c 00 20 00 6.a.,. .
00a0: 35 00 32 00 31 00 37 00 5.2.1.7.
00a8: 2c 00 20 00 30 00 2c 00 ,. .0.,.
00b0: 20 00 73 00 79 00 73 00 .s.y.s.
00b8: 74 00 65 00 6d 00 2e 00 t.e.m...
00c0: 74 00 79 00 70 00 65 00 t.y.p.e.
00c8: 69 00 6e 00 69 00 74 00 i.n.i.t.
00d0: 69 00 61 00 6c 00 69 00 i.a.l.i.
00d8: 7a 00 61 00 74 00 69 00 z.a.t.i.
00e0: 6f 00 6e 00 20 00 4e 00 o.n. .N.
00e8: 49 00 4c 00 0d 00 0a 00 I.L.....
in words
0000: 006c0063 00320072 00720030 002c0033
0010: 00640020 00730065 00670069 002e006e
0020: 00780065 002c0065 00340020 0030002e
0030: 0032002e 00310037 002e0032 002c0030
0040: 00340020 00320036 00620064 00660036
0050: 002c0064 00700020 00650072 00650073
0060: 0074006e 00740061 006f0069 0063006e
0070: 0072006f 002c0065 00330020 0030002e
0080: 0030002e 0030002e 0020002c 00370034
0090: 00620030 00390063 00610036 0020002c
00a0: 00320035 00370031 0020002c 002c0030
00b0: 00730020 00730079 00650074 002e006d
00c0: 00790074 00650070 006e0069 00740069
00d0: 00610069 0069006c 0061007a 00690074
00e0: 006e006f 004e0020 004c0049 000a000d
the error I was receivng for Blend reads as follows:
in bytes
0000: 63 00 6c 00 72 00 32 00 c.l.r.2.
0008: 30 00 72 00 33 00 2c 00 0.r.3.,.
0010: 20 00 62 00 6c 00 65 00 .b.l.e.
0018: 6e 00 64 00 2e 00 65 00 n.d...e.
0020: 78 00 65 00 2c 00 20 00 x.e.,. .
0028: 31 00 2e 00 30 00 2e 00 1...0...
0030: 31 00 30 00 38 00 33 00 1.0.8.3.
0038: 2e 00 30 00 2c 00 20 00 ..0.,. .
0040: 34 00 36 00 31 00 33 00 4.6.1.3.
0048: 63 00 39 00 39 00 35 00 c.9.9.5.
0050: 2c 00 20 00 6d 00 69 00 ,. .m.i.
0058: 63 00 72 00 6f 00 73 00 c.r.o.s.
0060: 6f 00 66 00 74 00 2e 00 o.f.t...
0068: 65 00 78 00 70 00 72 00 e.x.p.r.
0070: 65 00 73 00 73 00 69 00 e.s.s.i.
0078: 6f 00 6e 00 2e 00 66 00 o.n...f.
0080: 72 00 61 00 6d 00 65 00 r.a.m.e.
0088: 77 00 6f 00 72 00 6b 00 w.o.r.k.
0090: 2c 00 20 00 31 00 2e 00 ,. .1...
0098: 30 00 2e 00 32 00 2e 00 0...2...
00a0: 31 00 30 00 30 00 30 00 1.0.0.0.
00a8: 2c 00 20 00 34 00 36 00 ,. .4.6.
00b0: 31 00 33 00 63 00 39 00 1.3.c.9.
00b8: 37 00 33 00 2c 00 20 00 7.3.,. .
00c0: 62 00 35 00 38 00 2c 00 b.5.8.,.
00c8: 20 00 30 00 2c 00 20 00 .0.,. .
00d0: 73 00 79 00 73 00 74 00 s.y.s.t.
00d8: 65 00 6d 00 2e 00 74 00 e.m...t.
00e0: 79 00 70 00 65 00 69 00 y.p.e.i.
00e8: 6e 00 69 00 74 00 69 00 n.i.t.i.
00f0: 61 00 6c 00 69 00 7a 00 a.l.i.z.
00f8: 61 00 74 00 69 00 6f 00 a.t.i.o.
0100: 6e 00 20 00 4e 00 49 00 n. .N.I.
0108: 4c 00 0d 00 0a 00 L.....
in words
0000: 006c0063 00320072 00720030 002c0033
0010: 00620020 0065006c 0064006e 0065002e
0020: 00650078 0020002c 002e0031 002e0030
0030: 00300031 00330038 0030002e 0020002c
0040: 00360034 00330031 00390063 00350039
0050: 0020002c 0069006d 00720063 0073006f
0060: 0066006f 002e0074 00780065 00720070
0070: 00730065 00690073 006e006f 0066002e
0080: 00610072 0065006d 006f0077 006b0072
0090: 0020002c 002e0031 002e0030 002e0032
00a0: 00300031 00300030 0020002c 00360034
00b0: 00330031 00390063 00330037 0020002c
00c0: 00350062 002c0038 00300020 0020002c
00d0: 00790073 00740073 006d0065 0074002e
00e0: 00700079 00690065 0069006e 00690074
00f0: 006c0061 007a0069 00740061 006f0069
0100: 0020006e 0049004e 000d004c 000a
any help is appreciated and please let me know if you need any further info. thanks again. - Seems like a failure in the initial cpu selection when writing or reading to the memory.
- blitzwolf said:
Seems like a failure in the initial cpu selection when writing or reading to the memory.
what does this mean in terms of fixing anything (sorry, I'm not much on programming or hardware)
here's some more info...this was posted on the Dreamspark forum after I posted the stack trace and event viewer info...
Christian said:
This seems as if you have a font installed that is causing the problems... Have you ever tried to uninstall all the custom fonts that you have on your system. One of them kills Blend. I have read about this issue already somewhere else. Can't exactly remember where. The dude made it run again by deleting some custom fonts. Here it seems as if during the creation of a Font object inside of Blend the whole thing crashes. Probably the font can't be initialized properly.Have you a lot of custom fonts installed?
brokensequencer said:interesting...I don't have many, if any, 3rd party fonts that I know of...I'll have to check...I recently reformatted the machine anyway, and right off can't think of anything in particular, but I will def. take a look and post back. When I run Design, I see there is a task running called PresentationFontCache.exe. Could this have anything to do with it?
Thanks so much again. - just a little more info. I posted a stack trace on the Dreamspark forum and this was the reply from Christian and my reply as well.
Christian said:
You could check and remove the custom fonts that you installed... At least the following line at the top of the stack trace:System.TypeInitializationException was unhandled
Message="The type initializer for 'System.Windows.Media.FontFamily' threw an exception."
Source="PresentationCore"
TypeName="System.Windows.Media.FontFamily"
StackTrace:
at System.Windows.Media.Typeface..ctor(FontFamily fontFamily, FontStyle style, FontWeight weight, FontStretch stretch)tells me that it has to do with the constructor of the FontFamily class.
Also, I have read in some forums that the issue was fixed by removing the custom fonts and reinstalling them. Seems like as when a font isn't installed properly the FontFamily from WPF (Windows Presentation Foundation - on which Blend is based on) has problems.
brokensequencer said:Christian,
Thanks for the help. I checked my fonts folder and didn't see anything out of the ordinary. I even went through and deleted the fonts that I didn't recognize as "core" Windows fonts. Didn't see any custom or third party fonts. I've included a link to a screenshot showing the current fonts I have. Thanks again so much for your assistance.
- If you would send me your email address I will put you in contact with our support engineer. This is probably preferable than having me as a go-between. If you will, please send your email address to me at v-aford at microsoft dot com.
Thanks again for your patience!
Annie - Good idea! Better than trying to teach you to debug software issues here. Anyway, such a problem is rather easy to solve. Good luck!
- Hey all,
Just an update that I believe I've resolved this issue. The crash is occuring because of a bad system environment variable on the machine. I haven't yet heard from BrokenSequencer whether this resolution solved his problem, but I was able to reproduce the crash on one of my machines here internally and resolve it. Here's a breakdown of the issue and what you can do to fix it:
Problem
=============================
When launching Expression Design or Expression Blend, they will crash.
The crash report for Blend will contain:
EventType : clr20r3 P1 : blend.exe P2 : 1.0.1083.0 P3 : 4613c995
P4 : microsoft.expression.framework P5 : 1.0.2.1000 P6 : 4613c973
P7 : b58 P8 : 0 P9 : system.typeinitialization
The crash report for Design will contain:
EventType : clr20r3 P1 : design.exe P2 : 4.0.2712.0 P3 : 462db6fd
P4 : presentationcore P5 : 3.0.0.0 P6 : 470bc96a
P7 : 5217 P8 : 0 P9 : system.typeinitialization
Cause
=============================
The WinDir system environment variable is set to an incorrect value or is not resolving the %SYSTEMROOT% value to C:\Windows
Resolution
=============================
1. Right click 'My Computer', left click Properties, click the Advanced tab, click the Environment Variables button
2. In the System environment variables find the one in the list labeled windir – the value should be resolving to C:\Windows
3. Click that variable to highlight and then click Edit. The variable name should be windir and the value should be either %SYSTEMROOT% or C:\Windows – if you have %WINDIR% in there it won’t work. If the value already says
%SYSTEMROOT% but also appears in the environment variables dialog as ‘%SYSTEMROOT%’ that means it’s not being resolved correctly for some reason. In that case, set the value to C:\Windows and you should be okay.
4. Click OK to close the dialog box and launch Expression Design or Blend. - Will,
Thank you for all your work on this issue!
Annie - I wanted to give one more update on this issue. The environment variable wasn't the cause of BrokenSequencer's crash. After doing a remote debug we were able to figure out that it was, in fact, a corrupted font causing the problem. Someone else had pointed that out earlier. In this case there was a font called Tahoma.ttf with a size of 0 KB in the Windows fonts folder. Design does load the fonts on launch through the environment variables, which is how I found the other issue. The environment variable was good in this case and pointed to a good location.
What to look for if you suspect a bad font: Any font in the fonts folder that doesn't report a size or has a size of 0 KB, doesn't show a name or a font type. If you receive an error deleting the font you can run SFC /SCANNOW from a command prompt to do a repair of system files. You may be promtped for the operating system CD when you run this. Another option is to run CHKDSK /F from a command prompt to have windows repair bad sectors/clusters on the hard drive. - Hey, Will, this would be a good thing to put on your support blog: http://blogs.msdn.com/xdesignsupport/
Annie - Just wanted to say thank you again to all who assisted and especially Will for his patience and courtesy. Running Design now and it seems to be a very powerful program with some awesome possibilities. Thanks again.
- Hmmm... what are those fonts doing?
- I don't suspect malware in this case, if that's what you're alluding to. I believe this was a unique situation where a bad sector or some other hard drive anomaly happened to manifest itself over the spot where the Tahoma.ttf file was being kept, which caused it to only report some information.
Windows most likely tried to repair the file each time Expression Design was launched but received the CRC error and crashed the application. CRC errors are usually problems with the physical drive and can usually be cleared up with CHKDSK /F, which is what resolved this issue. - Might be useful info for some:
I had a virtually identical error with MS Pro Photo Tools. Un- and reinstalled all relevant Dotnet Frameworks and checked the fonts as advised above but with no success. Finally I did the WINDIR environment variable "trick" (see above) and it worked!
I have tried all the tricks on the book but my Expression Studio (Blend, Web Design) 3 still crashes..
Bad Font
Installing and Re-installing the DotNet Frameworks
Environment Variables
all of them. The worst is that I cannot even uninstall the studio so that I can re-install it.
The error is
Product
Microsoft Expression Web 3
Problem
Stopped working
Date
2009/11/05 07:04 AM
Status
Not Reported
Description
Problem signature
Problem Event Name: CLR20r3
Problem Signature 01: expressionweb.exe
Problem Signature 02: 3.0.1762.0
Problem Signature 03: 4a5de873
Problem Signature 04: PresentationCore
Problem Signature 05: 3.0.0.0
Problem Signature 06: 498d25f5
Problem Signature 07: 296e
Problem Signature 08: 40
Problem Signature 09: System.TypeInitialization
OS Version: 6.0.6002.2.2.0.256.4
Locale ID: 7177
Please note that I have reported about 1000 of the problems using Problem Report and Solutions, and there are no solutions.
My OS is Vista Enterprise SP2Stopped working
South African- I would recommend that you install the Windows Cleanup Utility here: http://support.microsoft.com/kb/290301 Once installed, try uninstalling Studio. If it still won't install, try installing it again and if the programs still don't work, uninstall Studio using the Cleanup Utility.
Assuming this method is successful and you want to install Studio again, try right clicking on the install file and choose Run As Administrator from the contest menu. This used to solve some issues with Design.
Please let me know about your progress. If this doesn't work I'll go find Will, our support engineer, to help you.
Annie I have tried that one as well... But the funny part is that even after unistalling Studio using Windows Cleanup Utility, I can still see Expression Studio in My Control Panel... But I even tried to install it again but it installs very well but still gives me the same problem. Today I have run the Debug Diagnostic Tool, results are as follows:
Analysis Summary Type Description Recommendation 
ErrorIn ExpressionWeb__PID__8016__Date__11_06_2009__Time_11_02_44AM__353__Second_Chance_Exception_E0434F4D.dmp the assembly instruction at kernel32!RaiseException+58 in C:\Windows\System32\kernel32.dll from Microsoft Corporation has caused a CLR Exception of type (System.TypeInitializationException) on thread 0
This exception originated from mscorwks!RaiseTheExceptionInternalOnly+2a8.Review the faulting call stack for thread 0 to determine root cause for the exception.
Please follow up with vendor Microsoft Corporation for problem resolution concerning the following file: C:\Windows\Microsoft.NET\Framework\v2.0.50727\mscorwks.dll.
InformationDebugDiag determined that this dump file (ExpressionWeb__PID__8016__Date__11_06_2009__Time_11_02_44AM__353__Second_Chance_Exception_E0434F4D.dmp) is a crash dump and did not perform any hang analysis. If you wish to enable combined crash and hang analysis for crash dumps, edit the CrashHangAnalysis.asp script (located in the DebugDiag\Scripts folder) and set the g_DoCombinedAnalysis constant to True.
Analysis Details
Your browser settings are currently prohibiting this report's scripts from running.
This is preventing some features of this analysis report from displaying properly. To enable scripts to run, right-click the security warning above and choose "Allow Blocked Content..." or enable the "Allow active content to run in files on My Computer*" setting on the Advanced tab of your "Internet Options" dialog to avoid being prompted in the futureTable Of Contents
ExpressionWeb__PID__8016__Date__11_06_2009__Time_11_02_44AM__353__Second_Chance_Exception_E0434F4D.dmp
Faulting Thread
Faulting Module Information
Report for ExpressionWeb__PID__8016__Date__11_06_2009__Time_11_02_44AM__353__Second_Chance_Exception_E0434F4D.dmp
Report for ExpressionWeb__PID__8016__Date__11_06_2009__Time_11_02_44AM__353__Second_Chance_Exception_E0434F4D.dmp
Type of Analysis Performed Crash Analysis Machine Name OTSILEEARLKO-PC Operating System Windows Vista Service Pack 2 Number Of Processors 2 Process ID 8016 Process Image C:\Program Files\Microsoft Expression\Web 3\ExpressionWeb.exe System Up-Time 04:23:16 Process Up-Time 00:00:05 Thread 0 - System ID 6640
Entry point ExpressionWeb+641e Create time 2009/11/06 11:02:39 AM Time spent in user mode 0 Days 0:0:0.93 Time spent in kernel mode 0 Days 0:0:0.405
Function Arg 1 Arg 2 Arg 3 Source kernel32!RaiseException+58 e0434f4d 00000001 00000001 mscorwks!RaiseTheExceptionInternalOnly+2a8 01d2d480 00000000 00000000 mscorwks!RaiseTheException+4e 01d2d480 00000000 002eed44 mscorwks!RaiseTheException+c0 00000000 637ea444 7e5ad60a mscorwks!RealCOMPlusThrow+30 01d2d480 00000000 002eed50 mscorwks!RealCOMPlusThrow+d 01d2d480 002eed44 680721eb mscorwks!MethodTable::DoRunClassInitThrowing+44c 7e84f30a 62fa3fe0 002eee20 mscorwks!MethodDesc::DoPrestub+111 00000000 7e84f35a 002ef2cc mscorwks!PreStubWorker+f3 002eee20 7e5ad60a 000074b4 0x000e0836 01d2d128 01d2d188 01d2d0f8 PresentationCore_ni!`string' <PERF> (PresentationCore_ni+0x7b724c) 01d2d11c 00000000 63655d0b PresentationCore_ni!`string' <PERF> (PresentationCore_ni+0x7b7437) 01d2c4d4 01d26a1c 002eeee8 PresentationCore_ni!`string' <PERF> (PresentationCore_ni+0x7b5c1b) 002ef0dc 67fa2dd0 ffffffff PresentationCore_ni!`string' <PERF> (PresentationCore_ni+0x69509f) 01d2c4d4 002eef18 002eef28 PresentationCore_ni!`string' <PERF> (PresentationCore_ni+0x9d48ff) 01d26a1c 01d24284 00000000 PresentationCore_ni!`string' <PERF> (PresentationCore_ni+0x1d249d) 00000000 00000000 01d251ec PresentationCore_ni!`string' <PERF> (PresentationCore_ni+0x1d2246) 01d251ec 01d26a1c 01d261cc PresentationCore_ni!`string' <PERF> (PresentationCore_ni+0x1d2133) 01c61198 01d28f50 00000000 PresentationCore_ni!`string' <PERF> (PresentationCore_ni+0x1cee19) 01c61198 00000000 00000000 PresentationCore_ni!`string' <PERF> (PresentationCore_ni+0x67bf77) 00000000 01c61198 00000000 Microsoft_Expression_Web_ni+aba6c 01cfa970 00000001 002ef0b0 ExpressionWeb_ni+93b6 004c89b8 00000000 002ef0c0 ExpressionWeb_ni+9445 002ef0fc 00000000 002ef140 mscorwks!CallDescrWorker+33 002ef190 00000000 002ef160 mscorwks!CallDescrWorkerWithHandler+a3 002ef190 00000000 002ef160 mscorwks!MethodDesc::CallDescr+19c 74603070 002ef344 002ef310 mscorwks!MethodDesc::CallTargetWorker+1f 74603070 002ef344 002ef310 mscorwks!MethodDescCallSite::CallWithValueTypes+1a 002ef310 7e84eaba 00000000 mscorwks!ClassLoader::RunMain+223 74601624 00000001 002ef44c mscorwks!Assembly::ExecuteMainMethod+a6 00000000 7e84e5e2 00000001 mscorwks!SystemDomain::ExecuteMainMethod+456 44e60000 00000000 7e84e532 mscorwks!ExecuteEXE+59 44e60000 7e84e54a 00000000 mscorwks!_CorExeMain+15c 00000000 67f40000 002efbfc mscoree!_CorExeMain+2e 00000000 002efc10 70a34de3 mscoree!ShellShim__CorExeMain+29 00000000 7774d0e9 7ffd4000 mscoree!_CorExeMain_Exported+8 7ffd4000 002efc50 77a119bb kernel32!BaseThreadInitThunk+e 7ffd4000 77777500 00000000 ntdll!__RtlUserThreadStart+23 70a34ddb 7ffd4000 00000000 ntdll!_RtlUserThreadStart+1b 70a34ddb 7ffd4000 00000000
In ExpressionWeb__PID__8016__Date__11_06_2009__Time_11_02_44AM__353__Second_Chance_Exception_E0434F4D.dmp the assembly instruction at kernel32!RaiseException+58 in C:\Windows\System32\kernel32.dll from Microsoft Corporation has caused a CLR Exception of type (System.TypeInitializationException) on thread 0
This exception originated from mscorwks!RaiseTheExceptionInternalOnly+2a8.Module Information
Image Name: C:\Windows\System32\kernel32.dll Symbol Type: PDB Base address: 0x77700000 Time Stamp: Sat Apr 11 08:25:33 2009 Checksum: 0x000dbe01 Comments: COM DLL: False Company Name: Microsoft Corporation ISAPIExtension: False File Description: Windows NT BASE API Client DLL ISAPIFilter: False File Version: 6.0.6002.18005 (lh_sp2rtm.090410-1830) Managed DLL: False Internal Name: kernel32 VB DLL: False Legal Copyright: © Microsoft Corporation. All rights reserved. Loaded Image Name: kernel32.dll Legal Trademarks: Mapped Image Name: Original filename: kernel32 Module name: kernel32 Private Build: Single Threaded: False Product Name: Microsoft® Windows® Operating System Module Size: 880.00 KBytes Product Version: 6.0.6002.18005 Symbol File Name: c:\symcache\kernel32.pdb\FCCF6FAC09804D49A4BB256A77F519572\kernel32.pdb Special Build: &
Script Summary Script Name Status Error Code Error Source Error Description Source Line CrashHangAnalysis.asp Completed
South African- Ok, this is all Greek to me. I need to go find Will and send him over here. Chances are I won't be able to contact him before Monday though. Sorry for the problems and the delay!
Annie - Ok, Thanks for your help Annie... Please forward the problem to anyone who might assist... Or else I just have to wait until Monday...
One other thing, I think maybe my .Net Framework 2.0 might be corrupt, because the dll its complaining about its under the .Net Framework 2.0 Folder (C:\Windows\Microsoft.NET\Framework\v2.0.50727\mscorwks.dll.)
Maybe I need to repair it.
I running Vista on my machine, I read somewhere that if you need to repair .Net Framework 2.0 in Vista, you basically have to repair the OS because .Net Framework 2.0 is part of Vista.
What I have noticed is that you can not install or unistall .Net Framework 2.0 in Vista... It is not even appearing on your Control Panel....
I am left with one option: Repair Vista
South African- EditadoEarlNet sábado, 7 de novembro de 2009 23:20Addition
- I need to mention that I have run the:
>sfc /scannow
>CHKDSK /F
Trying to repair anything that might be broken....
South African I did not have any choice but to re-install my OS to solve the above mscorwks.dll problem...
South African
